We all know that the main development of electric forklift power system device is the battery, but because of the battery and by which working parts structure? Only a better understanding of the forklift battery, only into the extension of the battery through the use of such wear parts of the network life, to achieve the effect of maximizing the utilization of resources, the following for you to introduce the composition of the forklift battery:
1、Power supply
When the engine starts, the ignition system is powered by the battery. Traction battery storage place: it can not be short-circuited; short-circuiting due to rain may produce fire, and may produce a small amount of hydrogen, so the battery must be stored in a ventilated, cool place. Lead-acid battery charging in the battery around the stagnation of many hydrogen gas, do not allow any open flame, should open the battery on the cover for charging. Forklift battery rental charging process battery will produce gas, should keep the charging place well ventilated, there is no open flame around, at the same time, the charging process produces oxygen, acidic gases will have an impact on the surrounding. When the engine starts, the generator generates electricity normally, and the electrical energy of the ignition system is provided by the generator.
2、Spark plug
Spark plug consists of shell, center working electrode, side electrode and insulator. Spark plugs are installed in the combustion of each cylinder for the chamber, its role is in the high-voltage electricity under the action of the breakdown and the spark plug to produce a gap, the formation of a spark to ignite the combustible mixture in the cylinder. In order to ensure the system spark plug and cylinder head between the sealing, in the spark plug can be installed when the gasket should be added.
Related: Forklift Battery
3、Distributor
The electric appliance consists of circuit breaker, distributor, capacitor and ignition advance angle device.
4、Ignition coil
It consists of a low-voltage control winding (primary working coil), a high-voltage winding (secondary coil), a housing and an additional resistor. Ignition coil is a no DC system pulse through the transformer, it will affect the battery or generator low voltage electrical material into 15-20kV high voltage electricity.
An additional resistor is mounted on the outside of the ignition coil housing between the insulated “switch +” and “switch” terminals. Additional resistor can improve the working characteristics of the ignition system, which is made of iron and aluminum alloy wire, with a rapid increase in resistance value when the temperature rises, the resistance value decreases rapidly when the temperature drops.
5、Ignition switch
Its function is to control the work of forklift ignition system, the ignition system is integrated with the starter switch, called ignition starter switch. Contact ignition switch, when the engine drives the distributor to rotate, it will produce high voltage electricity, and produce electric spark in the cylinder; cut off the ignition switch, the engine will not produce spark and flameout.